3-axis Turning (X, Z and C axis) Programmer Course – Heidenhain Control

Course level: Standard
Course duration: 3 days
Class size: 1-6 attendees
Course location: Mills CNC, Tachbrook link, Mills CNC Technology Campus, Tachbrook Park Dr, Royal Leamington Spa CV34 6SN
View on map
  • Heidenhain Control
  • Turning Machine type
£900.00 + VAT
per attendee
Enquire now

Course description

To ensure a positive learning experience course size is limited to 6 attendees.

Cost of course is £900.00 + VAT per attendee.

This course is for people looking to acquire the basic knowledge of how to program a 3 axis CNC Heidenhain-controlled lathe.

This is a standard level course and attendees need to be familiar with engineering and machine tools with some understanding of their layout and configuration. An understanding of component drawings would also be advisable.

Specific course content includes:

  • Introduction and review of a lathe and its layout
  • General safety and best-practice instruction
  • Overview of codes used in programming – i.e. G Codes, M Codes
  • Understanding CNC programs – structure and content
  • Explanation of Tool Change positions G14~G140
  • Programming with absolute and incremental values
  • Using Tool Editor with geometry and radius offsets
  • Tool nose radius compensation and vector quadrants
  • Rapid traverse and other feed-rate commands i.e. mm/rev and mm/min.
  • Creating simple programs using simulation – and how to edit them
  • Using multi repetitive cycles – G code and ICP Units
  • Face Drilling, Reaming, Tapping and Boring using C axis
  • Face Milling, Pockets,Grooves and Spigots and Irregular Contours Using C axis.
  • Side Drilling, Reaming, Tapping and Boring using C axis
  • Side Milling, Pockets, Grooves and Spigots and Irregular Contours Using C axis.
  • Writing extended programs to also include sub programs and sub routines

Safety Shoes and other P.P.E. Equipment is not required.

Heidenhain 3-axis programmer courses run at the Mills Mills CNC Training Academy last for 3 days

  • Day 1: Start: 9.30am – Finish: 5.00pm
  • Day 2: Start: 9.00am – Finish: 5.00pm
  • Day 3: Start: 9.00am – Finish: 4.00pm

Light lunch and soft drinks are provided. For special dietary requirements please contact the Mills Mills CNC Training Academy on 01926 438363 or email

Enquire about this Training course

If you'd like more details about any of our training courses, including dates and availability, give us a call on 01926 438 363 or fill out the form to get in touch.

"*" indicates required fields