Telephone - 01926 438363

4-axis Turning (X, Z, C and Y axis with Sub Spindle A or B) Programmer Course – Siemens Control including ShopTurn

Course duration is 5 days
																			

To ensure a positive learning experience course size is limited to 10 attendees.

Cost of course is £1500.00 + VAT per attendee.

The Sub Spindle part of the course is modular and can be added to Siemens 4-axis Turning (X, Z, C & Y) course.


Call the Academy for availability or complete the form below

Course information

Using the Siemens' ShopTurn function, along with ISO codes, helps fast and efficient programming. The function also allows 1st and 2nd operations to run automatically with Passovers and Bar Feeds.

The course consists of step-by-step instructions beginning with basic principles and gradually increasing in complexity. Specific descriptions and programming examples will also be covered in the course.

By the end of the course, you should be able to program components to a reasonable standard, thus achieving the full potential of your CNC turning centres.

Applicants should have a basic knowledge of Engineering and an understanding of component drawings would be advisable.

  • Specific course content includes:
  • Introduction & General Layout of Machine
  • Operator, Keyboard & Soft-key Explanation
  • Axes Configuration X, Z, C, Y and B axis Sub Spindle
  • Modes e.g. T, S, M and MDA etcÉ& Program Manager
  • Tool List Creation and Editing & Work Offset Menus
  • Create Shop Turn Program with Program Header
  • Planning the Machining Process & Structure of Left & Right Spindles
  • Contour Turning & Utilising ShopTurn
  • Turning, Facing & Boring Cycles
  • Hole Machining with Drilling, Tapping Cycles etc.
  • Simulating and Troubleshooting Programs
  • Grooving, Part Off, Threading Cycles
  • Drilling, Tapping & Thread Milling Cycles Using C or Y-axis
  • Pocket, Spigot & Engraving Milling Cycles Using C or Y-axis
  • Set Marks, Repeats in Sub Routines
  • Transformations Offset, Rotation Mirroring etc.
  • Explanation of Counter Spindle and Transfers if required
  • Description of M codes relative to type of Machine
  • Examples Utilising the Above
  • USB communication to machine

This course is run at the Mills Mills CNC Training Academy's facility in Leamington or can be held at a customer's facility. (Charges will be different to above.)

This course is theoretical and classroom-based using Touch Screen Computers with Siemens Sinutrain Control Simulation Software. Time can be spent training on a Siemens-controlled machine depending on availability.

If training is required at a customer's facility, it is important that attendees have a room with a projector & whiteboard available & unrestricted access to a Siemens-controlled turning centre if required.

To find out more about this course call the Mills Mills CNC Training Academy on 01926 438363.

Safety Shoes and other P.P.E. Equipment is not required.

Siemens 4-axis Sub Spindle/ShopTurn courses run at the Mills Mills CNC Training Academy last for 5 days:

  • Day 1: Start: 9.30am - Finish: 5.00pm
  • Day 2: Start: 9.00am - Finish: 5.00pm
  • Day 3: Start: 9.00am - Finish: 5.00pm
  • Day 4: Start: 9.00am - Finish: 4.30pm
  • Day 5: Start: 9.00am - Finish: 3.30pm

 

Machine availability will be decided on the day.

Light lunch and soft drinks are provided. For special dietary requirements please contact the Mills Mills CNC Training Academy on 01926 438363 or email sales@cnctrainingacademy.co.uk

Do you have a question about this course?

 
Where to find us

Mills CNC Limited
The Mills CNC Technology Campus,
Tachbrook Link,
Tachbrook Park Drive
Leamington Spa, Warwickshire, CV34 6SN

©2021 Mills CNC Training Academy | Privacy | Terms and Conditions | Contact Us