Fanuc Milling Manual Guide 4-axis Conversational Course

Course description

To ensure a positive learning experience course size is limited to 6 attendees.

Cost of course is £900.00 + VAT per attendee.

Using the Fanuc Manual Guide or NC Guide 4 Axis (X, Y, Z and 4th) function assists in creating a fast and efficient way of programming. The course consists of step-by-step instructions beginning with basic principles and gradually increasing in complexity. Specific descriptions and programming examples will also be covered in the course.

By the end of the course, you should be able to program components to a reasonable standard, thus achieving the full potential of your CNC machining centres.

Applicants should have a basic knowledge of Engineering and an understanding of component drawings would be advisable.

Course Content

• Control and Axis Description X, Y, Z and 4th Rotary Axis (A or B)
• Accessing the Manual Guide Screens
• Configuration of Fixed Forms and Tool Data
• Using Cycles for Facing, Contouring, Pocketing and Hole Machining on Face and A or B Axis
• Using Cycles for Drilling, Reaming, Tapping and Thread Milling etc
• Grooving Cycles, Residual Cutting and Embossing on Face and A or B Axis
• Simulation on Graphics, N.C. Conversion and Time Calculation
• Program Copying, Pasting and Cutting
• Using Sub Programs
• Drawing Billets and Castings of Different Shapes
• Using Components on 4th Axis Rotary Configuration (A or B)
• Using the Copy, Rotate, Mirror and Parallel Shape Function
• Engraving on Face or around the A Axis Rotary side
• Examples of the Above
• Program Input and Output through Memory Card
• Data Backup for Settings (Maintenance only)

Safety and PPE Requirements

Safety Shoes and other PPE equipment is not required.

Course Times

Fanuc Manual Guide courses run at the Mills CNC Training Academy lasts for 3 days:

• Day 1: Start: 9:00am – Finish: 4:00pm
• Day 2: Start: 8:45am – Finish: 4:30pm
• Day 3: Start: 9:00am – Finish: 4:30pm

Machine availability will be decided on the day.

Light lunch and soft drinks are provided. For special dietary requirements please contact the Mills CNC Training Academy on 01926 438363 or email sales@cnctrainingacademy.co.uk