Telephone - 01926 438363

2-axis Turning (X and Z axis) Programmer Course – Fanuc Control

Course duration is 2.5 days
																	

Class size is between 6 – 10 attendees maximum.

Cost of course is £750.00 + VAT per attendee.


Call the Academy for availability or complete the form below

Course information

This is a standard turning course designed for people with minimal knowledge and experience of engineering but who want to acquire the necessary skills to program 2-axis lathes.

The course is aimed at operators and setters looking to acquire new and upgrade existing skills, and at adult learners with basic knowledge and experience of the machining process looking to make the step up to CNC Programming.

The course is suitable for customers with either Doosan 2-axis lathes or other manufacturers' Fanuc controlled machines with a similar configuration.

If you are unsure about the suitability of the course please contact the Mills Mills CNC Training Academy on 01926 438363 or email sales@cnctrainingacademy.co.uk

Over the 2.5 days attendees will complete a number of integrated modules that include:

  • Turning principles plus general machine layout and axis configuration (X and Z axes)
  • Understanding cutting speeds and feeds
  • Understanding different types of programming methods including sub programs and routines as well as Incremental and Absolute Programming
  • Knowing how to create, edit and verify CNC Programs for 2-axis lathes
  • Understanding and using the different programming codes and cycles that form CNC programs i.e. ISO, Manual Guide etc.
  • Learning how to write Multi Rep & Canned cycles for Turning, Grooving, Drilling, Threading, Parting-Off etc.
  • Understanding the use and application of cutting tools in a CNC Program
  • Understanding work offsets i.e. G54 and G55
  • Understanding and applying tool geometry and wear offsets
  • Understanding cutter compensation G41 and G42

This course is popular and is in demand. It is scheduled to run a number of times during 2019.

To book your place online please refer to and follow the booking instructions.

To pay for your course please refer to the Payment Options page of this website.

This course lasts for 2.5 days:

  • Day 1: Start: 9.30am - Finish: 5.00pm
  • Day 2: Start: 9.00am - Finish: 5.00pm
  • Day 3: Start: 9.00am - Finish: 1.00pm

 

Light lunch and soft drinks are provided. For special dietary requirements please contact the Mills Mills CNC Training Academy on 01926 438363 or email sales@cnctrainingacademy.co.uk

In addition to this course the Mills Mills CNC Training Academy also runs other Fanuc Turning Programmer courses -

  • 3-axis Turning;
  • 4-axis Turning;
  • 4-axis Turning with Sub Spindle;
  • Twin Spindle/Twin Turret Turning;
  • Twin Spindle/Twin Turret with B axis;
  • Manual Guide Turning.

Do you have a question about this course?

 
Where to find us

Mills CNC Limited
The Mills CNC Technology Campus,
Tachbrook Link,
Tachbrook Park Drive
Leamington Spa, Warwickshire, CV34 6SN

©2020 Mills CNC Training Academy | Privacy | Terms and Conditions | Contact Us